Revitive comes with one pair of reusable (up to 20-30 applications) electrode Body Pads, which can be used to deliver Electrical Muscle Stimulation (EMS) to other parts of the body. The only program available in manual mode is the Body Pad EMS Program. If you wish to use TENS please download the App.
The Body Pads cannot be used at the same time as the foot-pads.
Using the Body Pads will automatically turn the foot-pads off.
Electrode Body Pads are for single person use only. Do not share Body Pads with other users.
Use the Body Pad EMS Program for muscle strengthening and rehabilitation when required,
from 30 minutes per day.
Do not use Revitive in EMS mode for more than 6 sessions of 30 minutes (or the
equivalent) per day. This may result in muscle fatigue
Use at an intensity that provides you with strong but comfortable muscle contractions.
It is important that you are hydrated. We recommend drinking a glass of water before
a Press the power button on Revitive to turn it on.
b You will hear a beep and the display lights will light up. Check that the Electrode Pads indicator
is lit. The time will read 30 minutes and the Intensity will read 00.
Press the Intensity Control button on the control panel to start stimulation. The Time Display will
start to count down in minutes as Revitive cycles through its program.
c Set the intensity at a level at which you can feel the stimulation creating a muscle contraction.
You can set the intensity between 1-99.
Please note that the intensity required may vary from day to day.
Press the plus button to increase the level.
Press the minus button to decrease the level.
d When Revitive times out, you will hear three beeps and Revitive will switch itself off automatically.
If you feel pain or discomfort:
• Lower the intensity of the Body Pads using the Intensity Control on the device.
• You can also choose to stop therapy before the end of the 30-minute session to avoid skin irritation by pressing the power button on Revitive.